Wood Heater Buyers Guide

When selecting a wood heater, there are a number of key factors to consider to ensure the heater you buy is suited to your circumstances and offers the best overall value. A properly selected wood heater should integrate perfectly into the aesthetic of your home, operate efficiently with low maintenance requirements and offer consistent, long-lasting heat for many years to come.

To purchase the perfect wood heater for your home, we recommend considering the following:

1. Type of Wood Heater

Freestanding or built-in fireplace
A freestanding wood heater offers the greatest installation flexibility as they can be positioned next to walls, in a corner or within a masonry fireplace, as long as the location meets the manufacturers set clearance requirements. This makes freestanding wood heaters an excellent option if you wish to conveniently retro-fit your heater into an established home.
A built-in wood heater can require additional planning as installation requires a custom-fit masonry or non-combustible fireplace cavity. Achieving the ultimate, modern fireplace aesthetic may be the reward for this extra preparation. These stunning heaters sit flush with the wall to offer a streamline appearance and striking views of the fire. Best suited to new homes or as a renovation project.

 03 convector built in heater 06 jumbo innovator

Convection or Radiant
Convection Wood Heaters are designed with air cavities around the outside of the firebox and a decorative outer casing. Heat is distributed by a flow of convective currents, with cooler air being drawn in to rise between the firebox and the outer casing. This cycle creates a flow throughout the room with the hottest air pushing up to the ceiling and the warm air remaining in the lower part of the room. Convection heaters build-up heat more gradually, but soon provide even, well-distributed warmth. An additional fan can be added to speed up this convection process.

In contrast, a Radiant Wood Heater works by releasing infrared heat directly from its outer surface onto surrounding objects. This results in more intense and localised heat transfer.

As a general rule, Radiant Wood Heaters are recommended for homes with high ceilings and several distinct living areas, separated by a wall. They are also ideal for draughty/less insulated homes. Convection Wood Heaters are best suited to well-insulated homes and open-plan living spaces with standard height ceilings.

2. Wood Heater Size 

Wood heaters are available in a variety of firebox sizes, and it is wise to consider the size required to effectively heat your home. Biggest is not always best. Too big a heater can result in excessive heat output and an overuse of logs. Too small, and you may be constantly adding more wood, or worse still, require a secondary heating source to warm your entire home. For your convenience, www.jarrahdaleheating.com.au lists the heating area of all Jarrahdale wood heater models. When calculating, it’s important to note that these are approximates, based on standard housing configurations, and you should always consider your personal circumstances.

3. Cast Iron or Steel

The most popular materials used to construct wood heaters are steel and cast iron. Each material has its own unique advantages and considerations.Innovator Lifestyle2


    • Heats and cools more quickly
    • Less expensive to fabricate
    • Lighter weight for transportation, installation and handling
    • Can be placed closer to walls and surfaces (in accordance with manufacturer guidelines)
    • Panels and parts are welded together to form a permanent bond with rarely any maintenance needs. However, should a panel or part become damaged, it can be removed and more easily be replaced.
    • Highly durable material with modern styling options available

Cast Iron:

    • Constructed using a mould, with parts mechanically fastened together with gaskets and furnace cement
    • Due to construction technique, additional maintenance may be required over time to prevent infiltration of the joins leading to improper combustion and over firing
    • As cast iron cannot be welded, surface wear and tear such as cracks can be difficult to resolve
    • Often considerably more expensive to purchase due to the complexity of the manufacturing process
    • Offers even, long lasting heat with less variation in temperature, but takes longer to heat up

While ultimately the choice of either a steel or cast-iron wood heater will come down to personal preference and economics, it is our belief that steel provides better overall value. All Jarrahdale wood heaters are constructed using solid-steel.

4. High Efficiency, Low EmissionsAHHA Social Media Graphics3

A highly efficiency wood heater with low particle emissions is better for your home, your pocket and the environment.
Since 2014, all new wood heaters sold in Australia were required to be certified by the Australian Home Heating Association (AHHA) as adhering to Australian Standards for wood heater emissions and efficiency (AS/NZS 4013). These standards were revised in August 2019 to include more stringent regulations and now state that wood heater emissions must be under 1.5 grams per kilo and have an efficiency requirement of 60%.

As a result, modern Australian wood heaters are now designed to provide more complete combustion; meaning the fuel is almost completely used within the firebox with far less soot and particles going up the chimney. This makes sense as a highly efficient wood heater means more effective heating, less money spent on wood, less work chopping and hauling wood, and a product that offers better air quality. Maintenance is also reduced as combustion is so complete, there is far less ash production. If you own a wood heater made before 1992, the AHHA now recommends replacement with a certified model. Or, if you are considering purchasing a second hand wood heater, it is advisable to consider its efficiency, as the time and money spent on additional wood, cleaning and maintenance may ultimately far outweigh any savings made on the initial purchase price.

All Jarrahdale wood heaters adhere to Australian Standards AS/NZS (2019), and in many instances, surpass these requirements.

AHHA Logo5. Australian MadeJDH AusMadeLogo

Buying an Australian made wood heater supports local manufacturers and guarantees your wood heater has been built to suit local conditions and complies with Australian Standards. It also ensures that if needed, replacement parts will always be readily available and you can make a manufacturer direct warranty claim with confidence, knowing it will be quickly addressed. Most importantly, whenever you pick up the phone for advice or to book a service, it is your assurance that you are speaking directly with the manufacturer or an authorised local agent with the knowledge and expertise to assist.

Buyer Beware: Some wood heater retailers may advertise that their wood heaters are Australian Made, when in fact, only a small selection of stocked models meet this standard. For maximum value in return for your investment, always ask if a wood heater has been locally constructed.

6. Clearances & Protection: Floor & Wall

A great wood heater will push out plenty of heat to keep you nice and warm, but it’s essential to ensure this heat does not become a fire hazard. The distance from the heater 05 jumbo innovatorto surrounding combustible materials, such as timber, vinyl or carpet must be considered. All wood heater manufacturers are required to provide an installation guide including the minimum clearances needed between a heater and combustible walls and flooring. It’s essential to discuss these requirements with your chosen provider. For all Jarrahdale wood heaters, minimum clearances are published on the back of our brochures and discussed during the consultation process.
Essentially, when installing close to a combustible wall, a half-round Safety Flue Guard with a minimum height of 1000mm is required. If the wall material is not considered combustible, such as brick or plaster, or additional wall protection is installed, the wood heater may be placed closer than the minimum clearances. 
If the wood heater is installed on combustible flooring such as carpet, vinyl or cork, a hearth is always required. Regardless of clearances, a hearth is generally recommended for all wood heaters, to protect the floor from embers that may escape when reloading the heater.

7. Installation

Knowing how to buy the right wood stove isn’t enough. If it isn’t properly installed, even the best wood heater can give you bad results. For a precision installation, we recommend asking your wood heater supplier to arrange this service on your behalf. Jarrahdale Heating have 39 years’ experience working with some of Perth’s best installers to ensure an expert fitting. Should you wish to organise your own installation, we can offer a recommended list of tradespersons. A list of certified local installers is also available through the Australian Home Heating Association website.

8. Lower Maintenance

Gone are the days of struggling to light the heater, frequently chopping wood and scooping ash out of your wood heater on a daily basis. Modern wood heaters have been thoughtfully designed to reduce maintenance requirements. Popular wood heater models now include non-catalytic converters, or ‘reburn systems.’ A reburn system works by pumping extra oxygen into the wood heater from the top to reignite the flames. This allows the heater to get much hotter, much faster, with the oxygen essentially creating a second and third mini fire above the original flames and burning through as much wood and soot as possible. This increases efficiency by maximising fuel use resulting in less soot going up your chimney, less reloading and temperature checking and a reduction in the frequency of chimney cleaning and ash removal.

Additionally, new wood heaters sold in Australia must now meet AS/NZS 4013 certification requirements regarding efficiency and low emissions. Therefore, purchasing a modern, certified wood heater will significantly reduce maintenance. This is why all Jarrahdale wood heaters are non-catalytic and certified.

Yet like all good things made to last, your wood heater will require a little TLC from time to time. The DFES of WA recommends checking your wood heater and flue at the start of each wood burning season to make sure it is clean, and arranging a chimney sweep as required. During the burning season, soot on the glass can be removed simply by rubbing with screwed up newspaper. Ash should be removed as it builds-up in the bottom of the firebox, but as previously mentioned, this should be relatively infrequently with a modern wood heater. By following these simple maintenance steps, you will ensure your wood heater lasts for many winters to come.

Posted in Uncategorised

Pioneer on Legs


Dimensions (mm) 630 W x 785 H x 530 D
Heating Area Up to 232 sq/m*
Distinction Available with side heat shields

The Pioneer on Legs is the perfect radiant wood heater for traditional homes with large, seperate rooms or living zones and high ceilings. It is also an excellent heating option for draughty, less insulated areas. The Pioneer on Legs features a contemporary, square fascia with a wide viewing area.

Perched upon custom-made, steel legs, this heater is designed to be in-keeping with heritage and character homes. Also available with a 320mm high pedestal stand. Optional side heat shields can be fitted for placement close to walls.

All Jarrahdale Wood Heaters are made right here in WA to strict Australian Standards using locally-sourced steel. Our fireboxes are made using 6mm solid steel while all other components are 8mm solid steel.

ADDITIONAL FEATURES05 pioneer on legs installed

Firebox Capacity Logs up to 580mm
Flue Size 150mm wide
Other Removable Baffle for easy cleaning
Colour 4 finishes available. View Colour Range


   Chrome Plated Door

   Decorative Flue Mesh

   Left-hand Door Opening

   Pedestal Base

*Approximate only. Based on 2.4m ceiling height

Colours & Accessories   |   Brochure   |   Request a Quote

Posted in Uncategorised

Swagman on Legs


Dimensions (mm) 540 W x 710 H x 455 D
Heating Area Up to 148 sq/m*
Distinction Available with side heat-shields

The Swagman on Legs has been specifically designed with traditional homes in mind. As our most compact wood heater, it is perfect for saving space while still efficiently heating up to 148sq/m, or approximately a three-bedroom home. It features four, custom-made steel legs to be in-keeping with heritage style homes. 

Also available with a pedestal base and optional side heat shields for placement close to walls.

All Jarrahdale Wood Heaters are made right here in WA to strict Australian Standards using locally-sourced steel. Our fireboxes are made using 6mm solid steel while all other components are 8mm solid steel.

ADDITIONAL FEATURES01 swagman on legs front

Firebox Capacity Logs up to 450mm
Flue Size 150mm wide
Other Removable Baffle for easy cleaning
Colour 4 finishes available. View Colour Range


   Chrome Plated Door

   Decorative Flue Mesh

   Left-hand Door Opening

   Side Heat Shields

   Available on Pedestal

*Approximate only. Based on 2.4m ceiling height

Colours & Accessories   |  Brochure   |   Request a Quote

Posted in Uncategorised

Solar & Air-Conditioning Packages

  Jarrahdale Cooling web   solarwa 5000px 2 copy logo grey

Solar PanelsSolar power has long been regarded as an effective way to reduce spikes in electricity bills during summer, when your air-conditioning may be running day and night. But what if your old air-conditioning system just isn’t running as efficiently as it once did?

With the latest, innovative reverse-cycle or evaporative air-conditioning, combined with solar power, you can dramatically reduce your electricity bills and enjoy year-round comfort. That's why Jarrahdale Heating & Cooling has partnered with Solar WA to bring you air-conditioning and solar power packages, specifically tailored to your home.

With a Solar WA system you could save an average of up to $2,518 per year in electricity bills and gain 7c for every unit of power fed back to the grid.*

Plus, receive median government rebates of up to $3,811 towards your new system.*

Savings liike this would far exceed your energy requirements for air-conditioning; providing drastic reductions in power consumption prices for your entire home!

Solar WA’s mission is to lower power bills through advanced solar technology and reliable, extensively tested solar products. Solar WA only use Clean Energy Council (CEC) Evaporative Cooling Lifestyleaccredited solar installers. A range of systems are available to suit the size of your home and availability of suitable rooftop space including 3Kw, 5Kw and 6Kw models.

Jarrahdale Special Offer

21 x 315watt Astronergy split cell Panels & Huawei Hybrid inverter for $3,997

* Latest Split Cell Technology - Improved module output, decreased risk of mirco-cracks & enhanced module reliability
* Reduced shadow loss & internal mismatch loss
* Huawei Inverter - Winner of 2017 Design Award (single phase model) & 2019 Inter-solar Award (3-phase model). Features hybrid plug-and-play to battery, WIFI monitoring and one of the highest efficiencies on the market; 98.6% maximum efficiency

Plus, no deposit finance and up to 36 months interest free terms available when combining your new air-conditioning and solar system. To discuss your requirements, find out more about packages available and gain finance assistance, simply chat with Jarrahdale Heating & Cooling today.

Seamlessly integrate air-conditioning and solar power into your home with the experts at Jarrahdale Heating & Cooling.

Posted in Uncategorised

Jarrahdale Heating and Cooling Perth.  Free in home or office visit to discuss your requirements.Book a consultation

Copyright © 2015 Perth, Western Australia – Jarrahdale Heating & Cooling.